会员登录.getTime()%>){kind=logo}
购物车()
首页>
耗材
成功收藏产品
商家描述
包装清单
售后服务
产品评价(0)
| Special Glass 10 Capillaries | ||||||||||||||||
| Special Glass 10 Capillaries | ||||||||||||||||
|
Applications
Features
Crystal Clear Special Glass 10 (soda lime glass) capillaries that are extremely thin walled (approximately 10 micron wall thickness). The length of the capillary has a well defined diameter, with one end having a funnel shape and the other end closed. Glass capillaries have a wall thickness of 0.01 mm and an overall length of 80 mm +/-5 mm. Glass capillaries are available in a wide range of outside diameters from 0.1 mm to 2.0 mm. They are designed to mount, hold, and store small molecule and biological macromolecular crystals for x-ray data collection. Capillaries can also be used for crystal density measurements and crystal growth experiments. The capillaries can be sealed tightly against moisture and gases using wax, epoxy, or other sealing materials. In determining what glass or quartz capillary is right for you, please refer to the “Linear Absorption Coefficient µ cm-1” table. This table indicates the amount of radiation that is absorbed by the capillary during x-ray data collection. For 0.1 mm to 2.0 mm capillaries the open end capillary tube base size is 3.0 +/- 0.15 mm OD x 0.2 +/- 0.10 mm Wall thickness. The Diameter is measured about 40 mm from the closed end. The tolerances are as follows. 0.1 mm -0.075 / +0.075 mm 0.2 mm -0.050 / +0.050 mm 0.3 mm -0.050 / +0.100 mm 0.4 mm -0.100 / +0.100 mm 0.5 mm -0.100 / +0.100 mm 0.6 mm -0.100 / +0.100 mm 0.7 mm -0.150 / +0.150 mm 0.8 mm -0.150 / +0.150 mm 0.9 mm -0.150 / +0.150 mm 1.0 mm -0.150 / +0.250 mm 1.5 mm -0.250 / +0.250 mm 2.0 mm -0.250 / +0.250 mm Capillaries have only been tested at atmospheric pressure (760 mmHg (torr), 29.92 inHg, 14.696 psi). Use at other pressures has not been tested. |
||||||||||||||||
硼硅玻璃10号毛细管壁厚0.01毫米，全长80毫米+ / - 5毫米。提供外径从0.1毫米到2毫米的毛细管，用于X射线数据收集，晶体密度测量和晶体生长实验。毛细管可以用蜡，环氧树脂等密封材料封闭，防止水分和气体。
应用
|
X射线数据采集 液-液扩散结晶 凝胶针状结晶 |
特征
|
10号硼硅玻璃 壁厚 10微米 |
描述
硼硅玻璃50号毛细管一端呈漏斗形，另一端封闭，壁厚0.01毫米，全长80毫米+/-5毫米，外径从0.1毫米到2毫米。可嵌入，盛放，储存小分子和生物大分子晶体用于X射线数据收集，晶体密度测量和晶体生长实验。毛细管可以用蜡，环氧树脂和其它密封材料密封，防止水分和气体。请参照“线性吸收系数µcm-1表“，以决定适合的玻璃/石英玻璃毛细管。本表展示的是X射线数据收集时的辐射吸收量。
0.1mm至2.0mm毛细管开口端的基础尺寸为：3.0+/-0.15mm外径 x 0.13+/-0.10 mm壁厚，直径为在毛细管封闭端40毫米处的测量值。